Evaluate and prioritize the factors affecting the commercialization of nanotechnology products in the food industry
(Case Study: Plantation and Industry Company of Golestan)
عباس
خمسه
هیات علمی دانشکده مدیریت دانشگاه آزاد اسلامی کرج
author
Zahra
Rostami
Ms. c. in technology management
author
text
article
2019
per
AbstractGiven to the importance of commercialization and barriers in the commercialization of products, of nanotechnology, there needs more emphasis on commercialization process in our industries. The aim of this study is to evaluate the factors affecting the commercialization of nanotechnology in Plantation and Industry Company of Golestan in order to form the design of commercialization patterns of nanotechnology products in the food industry. This study is an applied research due to the purpose and it is a descriptive survey in terms of the method. In this study, there has been used a model with 6 factors and 48 indicators approved its fitness with Smart Pls. To prioritize the factors affecting the commercialization, there has been used the analytical network process (ANP) and Super Decision Software. Based on ANP results, the technical factors are the first priority and environmental factors, human resources, finance, structure and organization and management are the next priorities according to the experts.
Quarterly journal of Industrial Technology Development
Technology Development Institute
2676-5403
16
v.
34
no.
2019
5
16
https://jtd.iranjournals.ir/article_32472_c07b8eddd3e9bc36d8f3308e3539ae70.pdf
The survey in implementation Barriers of continuous improvement
in the companies located in Science and Technology Park
Habibollah
MirGhafuri
Department of Economics, Management and Accounting, Yazd University
author
اکرم
شعبانی
دانشگاه یزد
author
soleyman
mansouri mohammad Abadi
PhD student Industrial Management the School of Accounting&Management, Allameh Tabataba’i University
author
text
article
2019
per
Quarterly journal of Industrial Technology Development
Technology Development Institute
2676-5403
16
v.
34
no.
2019
17
24
https://jtd.iranjournals.ir/article_32938_57f0eb366197b7bf66abf7120b151072.pdf
Identifying the main factors of technology development using interpretive structural modeling(ISM)
Hamzeh
Amin-Tahmasbi
Department of Industrial Engineering, Faculty of Technology and Engineering, East of Guilan, University of Guilan, Iran
author
text
article
2019
per
One of the reasons for failure and backwardness in the industry is the impossibility and readiness of technology development. Considering the importance of the topic of identifying the factors influencing the development of technology, in this study, by reviewing the literature, these factors were identified. Important factors were determined by using the opinions of experts in the small and medium industries of Guilan Province among 45 effective factors identified in 17 main factors. Then, the relationships between these factors were analyzed using a structured interpretive modeling (ISM) technique; their rank and their levels and the model of relationships among its key factors were determined. The results of leveling and investigating the factors influencing the development of technology showed that the factors of attention to the technology integration approach to the emergence of technological innovations, management mechanisms and organizational infrastructures, technological entrepreneurship and the main functions of diffusion and diffusion of technology are among the main factors of development technology in the small and medium industries and should be paid more attention.
Quarterly journal of Industrial Technology Development
Technology Development Institute
2676-5403
16
v.
34
no.
2019
25
38
https://jtd.iranjournals.ir/article_32995_7b2dfbaf4037f3b51db7f2489dfdf737.pdf
Development and localization of technology acceptance model (TAM) in small and medium-sized enterprises (SMEs)
Ali
Mollahosseini
Faculty of management and economics, Shahid Bahonar University of Kerman
author
Mohammad Hossein
Foroozanfar
Higher Education Complex of Bam
author
text
article
2019
per
Today, technology and related innovations have become one of the most important elements of the strategic environment of organizations. Therefore, the acceptance of technology by users is one of the most important factors in the success of an innovation. This research aims to provide a local model of technology acceptance in small and medium enterprises. In order to promote research and achieve the results, three main questions were raised, in addition to providing a local technology acceptance model, the effective factors were identified and ranked. The statistical population of this study includes managers of small and medium enterprises. The results indicate that seven factors of individual adaptation, organizational adaptation, perceived usefulness, perceived ease, attitude toward use, intent, and intention of use, and the behavior of using technology on technology acceptance. Also, after comparing the results of both Friedman test rankings and the AHP method, the same results were obtained so that the two attitudes toward the use, and intention and intention, had the most impact on the acceptance of the technology. At the end and after the adoption of the indigenous and fitted research model, practical proposals have been presented to the managers of small and medium enterprises.
Quarterly journal of Industrial Technology Development
Technology Development Institute
2676-5403
16
v.
34
no.
2019
39
48
https://jtd.iranjournals.ir/article_33399_a7106730c91b5fe089578e37f9444053.pdf
Typology of technological platforms: study of platform dynamics
Ahmad
jaafarnejad
Faculty of management
author
manoochehr
manteghi
Faculty of management
author
mohammad reza
sadeghi moghadam
faculty of management
author
Mohammad
Goshtasbi
PhD student of management of technology
author
text
article
2019
per
Nowadays, using the word “platform” in the area of management researches, especially in technology management, has expanded metaphorically and conceptually. This word describes a collection of parts of a general system which interarts with the other parts of the system, and together form the system architecture; it is used to describe managerial phenomena at the level of discrete products, product systems, supply chain of industry, markets, and industries. The aim of this study is reviewing systematically, classifying, and presenting a framework of different technological platforms in order to understand their dynamics and proposing a comprehensive typology of different types of them under a coherrent theoretical logic; thus, the field in which this word is used is focused instead of concentrating on its varied meanings. The results indicate that there are five technological platforms including organizational, product, supply chain, market, and industrial ones which are classified in three groups of internal, supply chain, and external platforms. After a comprehensive classification of different platforms is created, their dynamics are shown by presenting a continuum in the form of increasing the authorities of the factors involved in platform, the participative innovation potential and the competition among factors involved in platform for innovation.
Quarterly journal of Industrial Technology Development
Technology Development Institute
2676-5403
16
v.
34
no.
2019
49
66
https://jtd.iranjournals.ir/article_34039_d67984a96cb8177d39c376b1531d4334.pdf
Benefit from UAV technology in supply chain: study of the barriers and opportunities ahead
Mohammad Reza
Khodoomi
Bachelor of Industrial Engineering from Quchan University of Technology
author
Abdolhossein
Sadrnia
Industrial Department, Faculty of Engineering, Quchan university of technology
author
text
article
2019
per
The use of UAVs in the supply chain is a new issue. Many companies are researching and developing UAVs technology and using it in the supply chain, since UAVs commercially lead to competitive advantage, increased shipping speed, reduced costs, and environmental protection. Also, it increases the delivery of services to remote areas in critical condition. Drones, in view of their abundant capabilities, can, if implemented, transform traditional transportation methods. The use of UAVs in the supply chain, as any other new technology, has the barriers and challenges that this article, after reviewing the technology of UAVs, addresses the obstacles and the feasibility of UAVs in the supply chain, and opens up opportunities for the benefit of this technology.
Quarterly journal of Industrial Technology Development
Technology Development Institute
2676-5403
16
v.
34
no.
2019
67
76
https://jtd.iranjournals.ir/article_34101_1a6d81a25252d08843d8d1b6c9dfd758.pdf