نوع مقاله : مقاله علمی-پژوهشی

نویسندگان

1 عضو باشگاه پژوهشگران جوان و نخبگان، دانشگاه آزاد اسلامی واحد تهران مرکزی

2 شبکه تحلیلگران ایتان

3 مشاور پژوهشگاه صنعت نفت

4 پژوهشگاه صنعت نفت

چکیده

شناخت به موقع جایگاه فناوری‎های آینده یک صنعت کمک شایانی به مدیران در سرمایه‎گذاری به موقع در حوزه‎های نوظهور فناوری می‏نماید. از فواید این پیش دستی ایجاد مزیت رقابتی پایدار و موقعیت برتر در بازار صنعت آینده برای بنگاه‎ها می‎باشد. در این میان، چرخه عمر فناوری به عنوان ابزار پیش‏ بینی فناوری می‎تواند اطلاعات ارزشمندی از فناوری‎های مناسب آینده را به نمایش گذارد. که این اطلاعات با در نظر گرفتن تغییرات محیطی و محدودیت‎های طبیعی آینده روشنی برای جهت گیری‎های فناورانه بنگاه‎ها رقم خواهد زد. از آنجایی که استفاده از مدل چرخه عمر فناوری در پیش‎بینی جایگاه فناوری در آینده اغلب با دشواری‎هایی مواجه می‎باشد، نمی‌تواند به صورت دقیق و کمی‌شده وضعیت عمر فناوری را پیش‌بینی کند. از این رو، در این مقاله سعی گردیده تا با بهره‎گیری از منحنی اشتیاق به فناوری توسط موسسه تحقیقاتی گارتنر محدودیت‎های چرخه عمر فناوری برطرف گردیده و با تلفیق روش‎ فوق الگویی به منظور شناسایی هر چه بهتر فناوری ارائه گردد. منحنی اشتیاق فناوری مراحل گذار فناوری‎های جدید را از پیدایش تا فراز و فرود و در نهایت یافتن جایگاه واقعی فناوری توصیف می‎نماید. در ادامه مقاله این منحنی بر اساس فناوری‏های مربوط به چاپگرهای سه بعدی تشریح خواهد شد.

کلیدواژه‌ها

موضوعات

عنوان مقاله [English]

Using Hype Cycle to forecasting and analysis technological position: 3D Printing Technologies

نویسندگان [English]

  • hossein khosropour 1
  • Adel Azarbani 4

چکیده [English]

Appropriate evolution of the technological position in the future of industry would be significant for managers for a tailored investment in emerging technologies. The benefits of these evolutions are to make a sustainable competitive advantage and superior position in the industry futures of firms. In the meantime, the technological life cycle as a tool to predict the future of technology, can provide valuable information of appropriate technologies. The information with regard to environmental changes and natural limitations can make a bright future for technological orientation of the firms. Since the use of the technological life cycle model to predict the position of technology in the future is often faced with difficulty, it cannot accurately predict and quantify the state of the technology life. Therefore, in this paper we have tried to use Hype Cycle’ Gartner Research institute in order to cover the limitation of technological life cycle and by using a combination of the above method, a model of identifying the best technology will be offered. The Hype Cycle will introduce the transition of new technologies from beginning to rise and fall and the actual position of technology. In this paper technology of 3D printing will be discussed using hype cycle.

کلیدواژه‌ها [English]

  • Hype Cycle
  • Technological Life Cycle
  • S-curve
  • Technological Position
  • 3D printing