نوع مقاله : مقاله علمی-پژوهشی

نویسندگان

1 عضو هیات علمی جهاددانشگاهی صنعتی شریف- مدیر آزمایشگاه اپتیک - مدیر طرح و برنامه

2 جهاد دانشگاهی صنعتی شریف

چکیده

با پیشرفت فنآوری نیاز انسان به اندازه‌گیری‌های دقیق ابعادی گسترش یافته است به نحوی که امروزه اندازه‌گیری دقیق ابعاد قطعات یکی از بخش‌های مهم در فرآیند تولید، ساخت و کنترل کیفیت محصولات به شمار می‌رود. می‌توان گفت که در صنایع امروز سیستم‌های اندازه‌گیری صنعتی بخشی از سامانه های هوشمند کنترل هستند که با دقت بالایی پارامترهای تعیین شده را اندازه گیری و مانیتور می کنند. در بین روشهای اندازه‌گیری، روش‌های اندازه‌گیری تماسی مانند استفاده از کولیس و میکرومتر، روش‌هایی زمان بر و گاهی مخرب بوده و امکان استفاده از آنها در خط تولید قطعات وجود ندارد. در این مقاله، تکنولوژی ساخت میکرومتر اپتیکی دیجیتال به عنوان یک روش غیرتماسی و غیرمخرب به منظور اندازه‌گیری دقیق و بلادرنگ در سیستم‌های اتوماسیون صنعتی مورد بررسی قرار گرفته است. در این تحقیق، با تغییر المانهای مورد استفاده در سیستم‌های اپتیکی رایج، از جمله جایگزینی لیزر با LED، تغییر سیستم اپتیکی فرستنده و گیرنده نور، استفاده از آشکارسازهای ماتریسی و استفاده از روش‌های مناسب پردازش سیگنال، گامی در جهت رفع معایب سیستم‌های لیزری برداشته شده است.میکرومتر اپتیکی دیجیتال ساخته شده، قابلیت اندازه‌گیری ابعاد اجسام را با دقت 4± میکرومتر فراهم می‌آورد و با توجه به قابلیت اندازه‌گیری بلادرنگ ابعاد قطعات وارسال سیگنال بازخورد می‌تواند به منظور کنترل خط تولید استفاده شود. علاوه بر آن قابلیت نمایش مقطع جسم در حال اندازه گیری و هم‌چنین قابلیت ذخیره سازی اندازه‌گیری ها نیز در آن وجود دارد.

کلیدواژه‌ها

موضوعات

عنوان مقاله [English]

The fabrication technology of digital optical micrometer based on the use of advanced technologies

چکیده [English]

The increased quality demands on industrial equipment have resulted in more and more production lines of factories being equipped with precise measurement tools. It would provide feedback to help the user monitor and control the line. This could be a part of control techniques which is used in intelligent control systems.
Numbers of methods are available to quantify exterior size of objects: contact and noncontact. Non-contact measurement technologies designed to improve product quality as they avoid possible surface damage that can be caused upon contact. In this paper, we have studied the fabrication technology of a digital optical micrometer as a noncontact and nondestructive technique. In this way, inspection cycle times are faster and the measure value is more accurate for each new part inspected. Furthermore, it allows for the possibility of 100% automated inspection.
Through this experience, using of high power LEDs as a substitute for lasers besides modifying the optical transmitter and receiver units, utilizing of matrix detectors and special signal processing techniques, have improved the features of the optical micrometer. The characteristics of the optical micrometer include ±4μm precision, fast sampling rate, ease of operation, reduced human error and capability to be interfaced with computer systems for data processing in automated systems.

کلیدواژه‌ها [English]

  • Measurement Precision Instrumentation
  • technology
  • Optical methods
  • Optical micrometer