A Review of Turboshaft Engine Modeling and Control for the Development of a Digital Fuel Control Unit (FCU) and Test Bench System

Document Type : Research Paper

Authors

1 PhD graduate in Electrical and Computer Engineering from Semnan University

2 2Professor, Faculty of Electrical and Computer Engineering, Semnan University, Semnan, Iran

3 Faculty of Electrical and Computer Engineering, Semnan University, Semnan, Iran,

4 Automation Control group, Sharif University of Technology Branch,Tehran, Iran

10.22034/jtd.2026.2096659.2085
Abstract
Turboshaft engines require advanced and precise control systems due to their nonlinear dynamic behavior, performance constraints, and high safety requirements. In recent years, the replacement of hydromechanical control systems with Full Authority Digital Engine Control (FADEC) systems has paved the way for the development of digital Fuel Control Units (FCUs). The aim of this paper is to provide a comprehensive review of modeling, simulation, and control methods for turboshaft engines, focusing on the development of FCUs, and test bench systems for the PT6T engine. In this regard, the structure of turboshaft engines is examined. Also, different engine control architectures, including hydromechanical systems, digital electronic control, and FADEC systems, are analyzed, and the design requirements for FCUs are described. In addition, real-time simulation platforms, including SIL and HIL, are introduced as key tools for the development and validation of control algorithms. The results of this study show that the use of a digital architecture based on FADEC allows the implementation of advanced control algorithms, improves the accuracy of fuel flow regulation, increases reliability, and facilitates the development of fault diagnosis systems. The presented framework can be used as a basis for the design, development, and evaluation of digital fuel control units in turboshaft engines.

Keywords

Subjects

Banazadeh, A.; Abdollahi Gol, H.; (2018), "Model-based fuzzy control of a gas turbine coupled with a dynamometer", Journal of Propulsion and Power, vol. 34, no. 5, pp. 1178-1188.
Castiglione, T.; et al.; (2023), "Linear model of a turboshaft aero-engine including components degradation for control-oriented applications", Energies, vol. 16, p. 2634. doi: 10.3390/en16062634.
Chalmers, J. L. Y.; Bird, J. W.; Gauthier, D.; (2007), "Design and validation of an experiment for the detection and prediction of stall and surge in a PT6/T400 turboshaft engine", Proceedings of the ASME Turbo Expo, vol. 47950.
Culley, D. E.; Paluszewski, P. J.; Storey, W.; Smith, B. J.; (2009), "The case for distributed engine control in turbo-shaft engine systems", NASA Technical Memorandum, NASA/TM-2009-215654, Glenn Research Center, Cleveland, OH, USA.
 Garg, S.; (2013), "Aircraft turbine engine control research at NASA Glenn Research Center", NASA Glenn Research Center, Cleveland, OH, USA, NASA Technical Report.
Gozubuyuk, D.; (2024), "Full authority digital system control design for an aircraft", ResearchGate, doi: 10.13140/RG.2.2.36727.64164.
Greidanus, R.; Heldwein, M. L.; (2022), "Model-based control strategy to reduce the fault current of a gas turbine synchronous generator under short-circuit in isolated networks", Electric Power Systems Research, vol. 204, p. 107687.
Gu, Z.; Li, Q.; Pang, S.; Zhou, W.; Wu, J.; Zhang, C.; (2024), "Turbo-shaft engine adaptive neural network control based on nonlinear state space equation", Chinese Journal of Aeronautics.
Haj Mazar, Y.; (2024), "Helicopter propulsion: Turboshafts and turbojets".
Lutambo, J.; Jiqiang, W.; Hong, Y.; Georgi, D.; (2015), "Aircraft turbine engine control systems development: Historical perspective", Proceedings of the 2015 Chinese Control and Decision Conference, pp. 5736-5741. doi: 10.1109/ChiCC.2015.7260534.
Montazeri, M.; (2010), "Fuzzy logic computing for design of gas turbine engine fuel control system", Proceedings of the 2nd International Conference on Computer and Automation Engineering (ICCAE), vol. 5, pp. 723-727.
Montazeri-Gh, M.; Abyaneh, S.; (2017), "Real-time simulation of a turbo-shaft engine's electronic control unit", Mechanics & Industry, vol. 18, p. 503.
Montazeri-Gh, M.; Abyaneh, S.; (2018), "Error evaluation of hardware-in-the-loop simulation of a gas turbine engine fuel controller", Transactions of FAMENA, vol. 41, pp. 47-60. doi: 10.21278/TOF.41405.
Montazeri-Gh, M.; Rasti, A.; Jafari, A.; Ehteshami, M.; (2019), "Design and implementation of MPC for turbofan engine control system", Aerospace Science and Technology, vol. 92, pp. 99-113.
NASA; (2023), "Turboshaft engine modeling for vertical lift aircraft", NASA.
Nasir, A.; Mohammed, A.; Jiya, J. Y.; (2020), "Gas turbine engine: Design, application and performance analysis", in Transactions on Engineering Technologies, Springer, doi: 10.1007/978-981-32-9531-5_9.
Nkoi, B.; et al.; (2013), "Performance of small-scale aero-derivative industrial gas turbines derived from helicopter engines", Propulsion and Power Research, vol. 2, no. 4, pp. 243-253. doi: 10.1016/j.jppr.2013.11.001.
Otis, C. E.; Vosbury, P. A.; (2018), "Aircraft gas turbines power plants", Jeppesen Sanderson.
Otto, E. W.; Taylor, B. L.; (2014), "Dynamics of a turbojet engine considered as a quasi-static system", NASA Report 1011.
Paniccia, D.; et al.; (2025), "A supervised machine-learning approach for turboshaft engine dynamic modeling under real flight conditions", The Aeronautical Journal, vol. 129, no. 1340, pp. 2777-2801.
Richter, H.; (2012), "Advanced control of turbofan engines", Springer, doi: 10.1007/978-1-4614-1171-0.
Robertson, L.; (2014), "Development of an electronic control unit for the T63 gas turbine", Master Thesis, Cape Town University, South Africa.
Rout, S. K.; Minz, P.; Muduli, S. K.; Sahoo, B.; Sathpathy, N. C.; (2020), "Control actuation and simulation of pseudo FADEC of advanced turbo fan aero-engine", Proceedings of the International Conference on System, Computation, Automation and Networking (ICSCAN), pp. 1-5. doi: 10.1109/ICSCAN49426.2020.9262396.
Salehi, A.; Montazeri-Gh, M.; (2018), "Black box modeling of a turboshaft gas turbine engine fuel control unit based on neural NARX", Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering.
Salehi, A.; Montazeri-Gh, M.; (2020), "Design and HIL-based verification of the fuel control unit for a gas turbine engine", Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 234, no. 8, pp. 1460-1470. doi: 10.1177/0954410020910593.
Schenderlein, J.; Clayton, T.; (2015), "Comparison of helicopter turboshaft engines", University of Colorado Boulder.
Sheng, H.; Zhang, T.; Zhang, Y.; (2017), "Real-time simulation of turboprop engine control system", International Journal of Turbo & Jet-Engines, vol. 34, no. 2, pp. 187-197.
 Spang, H. A.; Brow, H.; (1999), "Jet engine control, implementations", in Wiley Encyclopedia of Electrical and Electronics Engineering, Webster, J., Ed., Wiley, New York.
Xin, C.; She, Y.; Xing, Y.; Meng, S.; (2024), "A model-based control strategy for turbo-shaft engine", Journal of Physics: Conference Series, vol. 2764, no. 1, p. 012064. doi: 10.1088/1742-6596/2764/1/012064.
Yang, Y.; Nikolaidis, T.; Jafari, S.; Pilidis, P.; (2020), "Gas turbine aero-engines real-time on-board modelling: A review, research challenges, and exploring the future", Progress in Aerospace Sciences, vol. 121, p. 100693.
Yang, Y.; Nikolaidis, T.; Jafari, S.; Pilidis, P.; (2024), "Gas turbine engine transient performance and heat transfer effect modelling: A comprehensive review, research challenges, and exploring the future", Applied Thermal Engineering, vol. 236, p. 121523. doi: 10.1016/j.applthermaleng.2023.121523.
Yepifanov, S.; Bondarenko, O.; (2022), "Development of turboshaft engine adaptive dynamic model: Analysis of estimation errors", Transactions on Aerospace Research, vol. 4, no. 269, pp. 59-71.
Volume 24, Issue 65
Autumn 2026
Pages 3-12

  • Receive Date 05 August 2026
  • Revise Date 05 September 2026
  • Accept Date 12 September 2026