Document Type : Research Paper

Authors

1 Semnan University

2 PhD Student, Industrial Management, Faculty of Economics, Management and Administrative Sciences, Semnan University, Semnan, Iran

10.22034/jtd.2022.698474

Abstract

In today's world, organizations are faced with impulses and disturbances such as; Changes in the level of customer expectations, technological changes, international sanctions and lack of resources are faced, which affect both organizational resilience and the choice of technology transfer methods. Therefore, this research was conducted to identify the most important components of organizational resilience with respect to the importance of technology transfer methods in companies designing and manufacturing power transmission line fittings. The method of the present research was applied, qualitative, cross-sectional and descriptive with the help of data collection tools including library studies, questionnaires and interviews and using the technique of quality performance development with a statistical community consisting of experts and industry and university experts who were selected non-randomly using judgment-targeted methods and networks were done. In this research, after identifying the most important factors influencing the choice of technology transfer method, the most common technology transfer methods and organizational resilience components, relationships and value of technology transfer methods and organizational resilience components were identified and analyzed using the quality house matrix. According to the obtained results, "the need to acquire technology" is the most important factor in choosing the method of technology transfer, "reverse engineering" method is the most optimal method of technology transfer and "trust between actors" is the most effective component of organizational resilience.

Keywords

  • Amini, M.; Developing A Technology Transfer Evaluation Model Using Fuzzy Inference System Integrated Approach and Fuzzy Analytical Hierarchy Process Process in Appliance Industry (Case Study of Emersan Co.), M.SC Thesis, Amol Institute of Higher Education, 2017.
  • Azar, A.; Khorrami, A.; “Designing a Supply Chain Resilience Model in the Pharmaceutical Industry with an Interpretive Structural Modeling Approach (ISM)”, Journal of International Business Administration, Vol. 3, continuous 10, Serial Number 10, pp.1-31, 2020.
  • Azar, A.; Shahbazi, M.; Yazdani, H.R.; Mahmoudian, O.; “Designing a Resilience Assessment Model of the Electricity Industry Supply Chain Using the Theme Analysis Approach”, Industrial Management Journal, Vol. 11, Issue 1, pp. 45-62, 2019.
  • Baghery, M.J.; Proposing a Model for Technology Acquisition: The Case of Aircraft Design Technology in Iran Aviation Industry, A. Thesis, University of Isfahan Faculty of Virtual Educations Department of Management, 2013.
  • Chitsazan, H.; Davari, A.; Jalali, M.; “Assessing Factors Affecting Small and Medium Enterprises' Resilience Capacity (A study of Automotive Suppliers)”, Journal of Entrepreneurship Development, Vo. 11, Issue 3 - Serial Number 41, pp. 421-440, 2018.
  • Daei Niaki, S.M.; Jafarnezhad, A.; Gheidar-Kheljani, J.; Hamedi, M.; “Identifying and Evaluating Factors Affecting the Resilience of Technology in Sanction Situations through Structural-Interpretive Modeling Approach”, Defensive Researches and Management, Vol. 19, Issue 88, Serial Number 88, pp.55-86, 2021.
  • De Moortel, K.; Crispeels, T.; “International university-university technology transfer: Strategic management framework”, Technological Forecasting & Social Change, 135, pp.145–155, 2018.
  • Dinmohammadi, A.; Sadat Rasoul, S.M.; Yosefiizenouz, R.; “Presenting a multi criteria decision making model for determining the most suitable technology transfer strategy of wind turbines (Case study: wind energy industry in Iran)”, Quarterly journal of Industrial Technology Development, Vol. 16, Issue 31, pp. 45-54, 2018.
  • Diorgenes, M.; Clarissa, R.; Dayanne, S.; Heitor, K.; “Strategic alliances and dynamic capabilities: a systematic review”, Journal of Strategy and Management, Vol. 12, Issue 1, pp. 83-102, 2019.
  • Distanont, A.; Khongmalai, O.; Kritpipat, P.; “Factors affecting Technology transfer performance in the Petrochemical Industry in Thailand: A Case study”, WMS Journal of Management, Vol. 7, Isuue 2, pp. 23-35, 2018.
  • Dong, D.; Liu, J.; Zhou, H.; “Influence factor analysis of supply chain resilience using ISM”, In 2016 13th International Conference on Service Systems and Service Management (ICSSSM), 1-5, 2016.
  • Dos, D.; Datta, A.; Kummar, P.; Kazancoglu, Y.; Ram, M.; “Building supply chain resilience in the era of COVID19: An AHPDEMATEL approach”, Operations Management Research, Vol.15, pp. 249-267, 2022.
  • Duchek, S.; “Organizational resilience: a capability-based conceptualization”, Business Research, Vol. 13, Issue 1, pp. 215-246, 2020.
  • Ebrahimi, S. A.; Chitgaran, H.; Resilient by design, Samt, Tehran, First Edition,
  • Ebrahimi, S. A.; Fiz, D.; Chitgaran, H.; “Comprehensive analysis of factors affecting the organizational resilience of SMEs”, ORMR, Vol. 7, Issue 3, pp. 37-58, 2017.
  • Elyasi, M.; Mirzaei, H.; Safardoust, A.; “iagnosing technology transfer process (case study: technology transfer of a kind of hunting weapon made in Turkey)”, Quarterly journal of Industrial Technology Development, Vol. 15, Issue 29, pp. 89-100, 2017.
  • Estep, J.; Daim, T.; “A framework for technology transfer potential assessment”, In Management of Engineering and Technology, Portland International Conference on, pp. 2846-2852, 2016.
  • Farrokhi, M.R.; The Impact of Technology Transfer on Competitive Performance of Company: Case Study in Tehran Wagon Manufacturing, A. Thesis, Islamic Azad University Safadasht Branch, 2017.
  • Ghorbanpour, A.; Rasuli, E.; “Interpretive Structural Modeling of Supply Chain Resilience: Case of Power Distribution Company of Bushehr Province”, Quarterly Journal of Energy Policy and Planning Research, Vol. 4, Issue 2, pp.169-200, 2018.
  • Haririan Yazdi, M.; Recognition and ranking of effective factors on technology transferring in bank Melli Iran, M.A. Thesis, Science & Art University, 2016.
  • Hills, J. M.; Μichalena, E.; Chalvatzis, K. J.; “Innovative technology in the Pacific: Building resilience for vulnerable communities”, Technological Forecasting and Social Change, Vol. 129, pp. 16–26, 2018.
  • Hosseinabadi, V.; Ghareche, M.; Hosseini, S. M.;” Explaining the Resilience Components Pattern of Detergent Industry Firms”, Journal of Business Administration Researches, Vol. 12, Issue 23, pp.35-58, 2020.
  • Jafarnejad, A.; Momeni, M.; Razavi Hajiagha, S. H.; Faridi Khorshidi, M.; “A dynamic supply chain resilience model for medical equipment’s industry”, Journal of Modelling in Management, Vol. 14, Issue 3, pp. 816–840, 2019.
  • Jahani, M.; Moghbel Baarz, A.; Azar, A.; “Designing a Model for the Measurement of Supply Chain Resilience through SEM Approach”, Journal of Industrial Management Perspective, 7, Issue 1, pp.91-114, 2017.
  • Karimi Zarchi, M.; Mabodi, H.; Fathi, M.R.; Khosravi, A.; “Providing Resilient Defense Supply Chain Model Using Structural-Interpretative Modeling”, Journal of Improvement Management, Vol. 14, Issue 2, Serial Number 48, pp. 67-91, 2020.
  • Khalil, T.; Management of Technology: The key to Competitiveness and Wealth Creation, Translated by: Aarabi, M., Iran Cultural Studies, tenth edition,2016. 
  • Khamseh, A.; Pilvari, N.; Neyrizi, Z.; “Assessment and Prioritization of Effective Factors on Technology Intelligence in the Power Plant Industry (Case Study: MAPNA Power Plants Construction & Development Company, MD-1)”, Future Study Management, Vol. 30, Issue 116, Serial Number 116, pp. 87-98, 2019.
  • Khosavi, S.; Najafi, A.; Marjani, M.R.; Mohammadi, N.; “Investigating the Relationship between Organizational Resilience Components with Business Continuity and success in banking”, Journal of Development & Evolution Management, 12, Issue 40, pp. 25-42, 2020.
  • Kumar, S.; Luthra, S.; “Identification and evaluation of critical factors to technology transfer using AHP approach”, International strategic management review, Vol. 3, pp. 24–42, 2015.
  • Lai, W.; Tsai, C.; “Fuzzy rule-based analysis of firm's technology transfer in Taiwan's machinery industry”, Expert System with Applications, Vol. 36, Issue 10, pp. 12012-12022, 2009.
  • Lee, S.; Kim, B. S.; Kim, Y.; “The framework for factors affecting technology transfer for suppliers and buyers of technology in Korea”, Technology Analysis & Strategic Management, Vol. 30, Issue 2, pp.172-185, 2018.
  • Li, R.; Dong, Q.; Jin, C.; Kang, R.; “A New Resilience Measure for Supply Chain Networks”, Sustainability, Vol. 9, Issue 1, pp.1-19, 2017.
  • López, C.; Ishizaka, A.; “A hybrid FCM-AHP approach to predict impacts of offshore outsourcing location decisions on supply chain resilience”, Journal of Business Research, 103, pp. 495-507, 2019.
  • Mahmodi, D.; Alizadeh, S.S.; Rasoulzadeh, Y.; Asghari, M.; “Prioritizing the thirteenth dimensions of Organizational Resilience in dealing with crises and major accidents”, IOH, Vol. 17, Issue 1, pp. 792-806, 2020.
  • Malekdar, M.; “The statistics of setting up factories in the 11th government is 5 times more than the number of closed factories”. http://www.irna.ir/fa/News/82523129, 2018.
  • Mardani Shahrbabak, M.; Kalhori, M.; “Providing a Suitable Model for Implementing Resilient Supply Chain in Project-Oriented Organizations”, Military Management Quarterly, Vol. 20, Issue 77, pp. 189-218, 2020.
  • Mehrabi, A.; “The Identification And Ranking Factors Affecting The Transfer Of Technology In The Textile Industry”, Journal of Textile Science and Technology, Vol. 6, Issue 3, Serial Number 19, pp. 45-54, 2017.
  • Mehrabi, A.; Kariminejad, D.; “Measurement and analysis of resilience in the supply chain (case study: Petrochemical Company)”, 2th international conference on industrial management, pp. 1-18, 2017.
  • Mirfakhradini, S.H.; Salami, H.; “Meta-Synthesis of Supply Network Resilience Measurement Models”, Resource Management in Police, Vol. 8, Issue 1, pp. 91-120, 2020.
  • Mohaghar, A.; Monawarian, A.; Raassed, H.; “Evaluation of technology transfer strategy of petrochemical process”, The Journal of Technology Transfer, Vol.37, pp. 563–576, 2012.
  • Mohamed, A. S.; Hamouda, A. M. S.; Baharudin, B. H.; Sapuan, S. M.; Ahmad, M.; “Modeling the technology transfer process in the petroleum industry: Evidence from Libya”, Mathematical and Computer Modelling, Vol. 55, pp. 451-470, 2012.
  • Mohammadi Shahroodi, H.; Rahimnia, F.; Malekzade,G.; Khorakian, A.; “Presentation of Organizational Resilience Pattern in Manufacturing Companies with Using the Grounded Theory Approach”, Public Management Researches, 12, Issue 43,Serial Number 43, pp. 111-134, 2019.
  • Mohammed, A.; “Towards ‘gresilient’supply chain management: A quantitative study”, Resources, Conservation and Recycling, Vol. 155(104641), 2020.
  • Muñoz, S.; Sánchez, R.; Siligardi, C.; Muiña, F.; “New Circular Networks in Resilient Supply Chains: An External Capital Perspective”, Sustainability, Vol. 13, Issue 11(6130), 2021.
  • Orchiston, C.; Prayag, G.; Brown, C.; “Organizational resilience in the tourism sector”, Research Notes and Reports/Annals of Tourism Research, Vol. 56, pp. 145-148, 2016.
  • Rahimian, M. M.; Rajabzadeh, A.; “Interpretative and Structural Analysis of Dimensions and Components of Supply Chain Resilience with Fuzzy approach”, 3rd International Conference on Industrial Management, pp.1-14, 2018.
  • Rajesh, R.; “Technological capabilities and supply chain resilience of firms: A relational analysis using Total Interpretive Structural Modeling (TISM)”, Technological Forecasting and Social Change, Vol. 118, pp. 161-169, 2017.
  • Rehak, D.; “Assessing and strengthening organisational resilience in a critical infrastructure system: Case study of the Slovak Republic”, Safety Science, Vol. 123, 104573, 2020.
  • Salehi Abarquee, M. A.; Amiri, M.; Olfat, L.; Feizi, K.; “A Framework For Evaluating Organizational Resilience In Iran Leather Industry”, Modern Researches In Decision Making, Volume 3, Issue 3, pp. 105-128, 2018.
  • Shafiei Nikabadi, M.; Aghababayi, H.; “An Integrated Fuzzy Model for Selecting Resilient Suppliers in Electronics Industry of Iran”, Logistics 2021, Vol. 5, No. 71, 2021.
  • Shafiei Nikabadi, M.; Zarei, A.; Kalantari,H.; Shambayti, H.; “Identification of Key Strategies for Olive Crop Production and Technical Requirements for their Implementation with the World Class Manufacturing Approach”, Journal of Entreneurship and Agriculture, Vol. 4, Issue 8, pp. 1-12, 2018.
  • Sharma, S.; Sharma, S. K.; “Probing the Links between Team Resilience, Competitive Advantage, and Organizational Effectiveness: Evidence from Information Technology Industry”, Business Perspectives and Research, Vol. 8, Issue 2, pp. 289–307, 2020.
  • Stone, J.; Rahimifard, S.; “Resilience in agri-food supply chains: a critical analysis of the literature and synthesis of a novel framework”, Supply Chain Management, Vol. 23, Issue 3, pp. 207-238, 2018.
  • Taghavifard, M. T.; moghimi Shahri, B.; Hooshangi, M.; “Selecting the appropriate technology transfer method by using of DEMATEL and ANP (Case study: Two companies porcelain Khorasan)”, Journal of Technology Development Management, Vol. 3, Issue 1, pp. 75-100, 2015.
  • Tahmasbi, H.A.; Haami, M.; “Analysis of the Supply Chain Resilience and sustainability Criteria in Pharmaceutical Industry Using Interpretive Structural Analysis Method”, Standard and Quality Management Journal, 34, Issue 4, pp. 40-48, 2020.
  • Tibay, V.; Miller, J.; Chang, A.; Egbelakin, T.; “Business resilience: A study of Auckland hospitality sector”, Procedia Engineering, 212, pp. 1217–1224, 2018.
  • Yarali, A.; Evaluation of Factors Affecting the Resilience Capacity of Small and Medium Businesses (Case Study of Chabahar Free Zone), SC Thesis, International University of Chabahar, 2019.